REAR SWAY BARS: If you are converting to the coil over shock system, then you might want to look into fitting a rear sway bar to your new frame. This sway bar is custom made for us by a premier sway bar manufacturer and is fabricated to fit our frames only if a coil over shock system is used. The coil over system frees the mounting whole normally used by the lever shock on the swing arm. That mounting point is now used for the end link attachment of the sway bar. The bar rides up and over the differential along the spring tower cross member and is held in place by brackets and bushings at two locations. These mounting points are unique on the RATCO cross member design and provide the ultimate location for the sway bar.

The bars are 4140 chrome molly steel and are mandrel bent to our specifications. They come with all the hardware and end links sets and are mounted to the frame here at the factory. These 3/4 inch diameter bars and all the hardware are powder coated for lasting durability.

(NOT AVAILABLE FOR CH03 SERIES)